DigiDot® drop-on-demand, piezoelectric
Water based pigment ink¹
Next generation look & feel user interface
Pinless tight web with tension control
Tight web unwinder (included in basic unit)
Open post-processing interface with Type1 connectivity²
Duplex 4/4
1200 × 1200 dpi
160
3,232 A4/min
23 - 105
Roll-to-roll (optional slitter in rewinder with adjustable position)
30" (762 mm)
17" (432mm) - 29.5" (750 mm)
54" (1,370 mm)³
29.5 x 54" (750 x 1,370 mm³)
64 - 157 gr/m² ¹
Max. 50" diameter; max. weight 1.4 t
70 mm, 3", 6", other shaft sizes on request
Offset coated and uncoated, inkjet-treated and coated, book paper
12,300 mm (13,350 including paper reels)
3,715 mm
2,070 mm
22.9 t (roll-to-roll configuration)
< 750 kg per levelling pad
Input via transformer: 400 V / 340 A
Input hot air dryer: 400 V / 32 A
Controller: 400 V / 32 A
Input via transformer: 480 V / 320 A
Input via controller transformer: 200 V / 64 A
20
183¹²
Optimal range 20 –26 °C. Extended range 16 –29 °C¹
Optimal range 40 - 60%, Extended range 30 - 80%¹
< 75 dB
High-performance SRA MP controller
AFP/IPDS (IS/3), PDF (APPE 3), Line Data, LCDS, PostScript, PPML, TIFF, VIPP¹
PRISMAproduction® or other output management systems¹
10 Gigabit Ethernet
All information is subject to change without notice.
¹ The ImageStream inks contain materials that may be considered VOCs. Please consult your local regulatory organization for clarification and possible obligatory certification.
² Interface specification details are available on request.
³ For format length >14“ technology-intrinsic effects for certain applications might occur. Refresh measurements help to minimize or partly avoid these effects.
¹ Please refer to the actual paper specification list for available papers. Other papers have to be qualified prior to usage. Paper weights outside the standard weight range have to be tested by HQ paper lab in Poing.
¹ Typical power consumption with economic printer settings for inkjet treated/coated paper.
² Print engine excluding SRA MP Controller.
¹ Restrictions in the print operation and in the print quality are possible.
¹ Restrictions in the print operation and in the print quality are possible.
¹ Use with 3rd party Output Management System must be tested and confirmed.
¹ Partly in combination with PRISMAproduction.