RF-S Lenses

Canon RF-S 14-30mm F4-6.3 IS STM PZ

Specifications

Specifications

  • 14-30mm

    Ultra-wide to standard focal length, optimised for video creation.

  • Power Zoom

    For smooth zoom transitions with two-step variable speed and 15 adjustable levels.

  • Combined control and focus ring

    For manual control over focus and easy adjustments to settings.

  • STM autofocus

    For smooth and silent focus tracking and transitions.

  • Optical image stabilisation 1

    For shake-free handheld shooting, with up to 7.5 stops of stabilisation when paired with IBIS 1 .

  • 2 UD elements

    For exceptional image quality with reduced aberrations and enhanced clarity.

  • Non-extending design

    For consistent balance on tripods and gimbals, keeping your setup stable while zooming.

  • Compact and lightweight

    Ideal for travel, weighing just 181g.

Specifications in detail

Optical Features / Specifications

  • Image Size
    APS-C
  • 35mm Film Equivalent Focal Length (mm)
    22.4-48mm
  • Angle of View (Horizontal, vertical, diagonal)
    78°05' - 41°25'
    56°40' - 28°15
    88°30' - 48°50'
  • Lens Construction (Elements/Groups)
    10/9
  • Special Optics
    2x Pmo aspherical
    1x UD
  • Special Features
    Internal Power Zoom
  • Number of Diaphragm Blades
    7
  • Minimum Aperture
    22-36
  • Closest Focusing Distance (m)
    0.15
  • Maximum Magnification (x)
    0.38
  • Control Ring
    Combined / focus
  • Image Stabilizer OIS1
    5
  • Image Stabilizer IBIS x OIS2
    Centre: 7.5
    Corner: 5.5
  • AF Actuator
    STM
  • Coatings
    Super Spectra
  • Fluorine
    No

Accessories

  • Lens Cap
    E-58II
  • Lens Hood
    EW-63C
  • Lens Case/Pouch
    LP1014
  • Rear End Cap
    Lens Dust Cap RF
  • Extender Compatibility
    Not compatible

Physical Specifications

  • Dust/Moisture Resistance3
    No
  • Exterior Coating
    -
  • Filter Diameter (mm)
    58
  • Max. Diameter x Length (mm)4
    69.6 x 62
  • Weight (g)
    181
  1. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  2. Tested under CIPA standards. Lenses released after July 2024 tested under CIPA-2024 standard in the yaw/pitch (+ roll in case of IBIS) directions at maximum focal length, with a specific camera.
  3. Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause slight abrasion of the camera mount. This in no way effects either the lens or camera performance.
  4. Lens dimensions when in retracted state